Electric bike · Independent review

Duotts N26 review

Duotts N26 review: 48V 20Ah battery with Samsung cells battery, weight definitions, regional motor claims and practical ownership checks.

Product evidence checked 7 October 2026

Our assessment

The N26’s 39.16kg listed weight and 60mm dual-crown fork favour storage with direct ground access. Extra fork crowns are not evidence of more travel or better damping than a conventional suspension fork.

Electric mountain bicycles on a trail

Published specification

Duotts N26 specifications
Battery48V 20Ah battery with Samsung cells
Charging Time6–7 hours
Max RangeUp to 120 km in assist mode (actual performance varies with temperature, terrain, rider weight, etc.)
FrameAluminium alloy frame
Transmission SystemShimano Tourney 1×7-speed derailleur system
ForkDual-crown suspension fork with aluminium crown and steel stanchions, 60 mm travel, adjustable, with lockout
Bike Weight39.16 kg
Top Speed(International) 45 km/h
Regional motor claims250W/750W *2 EU / International version

Specifications can change between markets and production batches. Match these entries to the exact supplied version.

What stands out

  • Published battery information: 48V 20Ah battery with Samsung cells
  • Model-specific source and weight evidence: 39.16 kg

Limitations and unknowns

  • EU and international configurations share a product page; select and verify the actual version.
  • Range varies with assistance, rider weight, temperature and terrain.
  • The supplied regional configuration and proprietary spare-parts support need written confirmation.

Battery and range: what the figures mean

The Duotts N26 battery is listed as 48V 20Ah battery with Samsung cells. Multiplying nominal voltage by amp-hours gives approximately 960Wh of stored energy; this is nominal energy, with usable capacity affected by the battery system and operating conditions. Reserve energy for cold conditions, hills and an ageing pack rather than designing a journey around the headline maximum.

Weight, storage and equipment

The published Duotts N26 weight entry is 39.16 kg. Read the definition carefully: a shipping figure, accessory-excluded net weight and complete-bike weight answer different questions. For practical ownership, check the mass you will actually lift with the battery, rack and daily equipment installed, and try that lift before deciding on upstairs storage.

The Duotts N26 frame or fork entry is Aluminium alloy frame. Construction material and travel are useful specifications, but they do not establish ride comfort. A demonstration on your normal road surface and a check of the complete equipment list are more useful than assuming that a premium frame label guarantees a better ride.

Regional specification and British road use

The Duotts N26 range needs to be checked against the exact supplied regional version. For ordinary EAPC treatment in Great Britain, the continuous rated motor output must not exceed 250W and assistance must cut off at 15.5mph, alongside the other pedal-cycle requirements. Obtain the motor marking, controller specification and throttle documentation; a peak-power number alone does not decide the category.

Support and the checks before ordering

For the Duotts N26, obtain a model-specific replacement-battery quote, the charger part number and an identified warranty contact before ordering. Confirm whether the seller supplies spare displays, controllers and motor connectors for this exact generation. Ordinary cycle components may be serviceable locally while proprietary electrical parts still depend on the original supplier.

Specifications and further reading

Editorial policy and research standards

Compare within the Duotts range

← Back to the worldwide bike-brand directory